INFLATABLE BOAT FOLDING ALUMINUM TUBE LADDER (Ø32 MM) (NLp032)
Inflatable boat folding aluminum tube ladder (Ø32 mm) (NLp032) for inflatable board in Canada or the United States? Navigator Inflatable Boats offers a great variety of accessories for Inflatable boats in North America, including boat ladder (NLp032), pumps, bags, wheels, equipment, fittings and other attachments for a boat.
The Inflatable boat folding aluminum tube ladder (Ø32 mm) (NLp032) is installed in two NLP224 or NLP225 locks located at a distance of 305 mm. The design has swivel joints, which allows you to repeat the shape of the inflatable board and fold the ladder for storage or transportation. The set includes pipe connectors made of polyamide fixed to a coated aluminum pipe Ø 32 mm. The connections are made with a polyamide nut handle and a stainless steel bolt, between which there is a stainless steel spring for quick opening of the splines. The set includes the ladder and two PVC pads with mounts.
The mounting kit allows for quick and easy installation of the whole range of Navigator accessories on an inflatable side of a watercraft. With the use of the NLP225 PVC mounting pad, a mount is reliably attached to an inflatable side and enables the whole range of Navigator equipment to be used. It is recommended to glue the mounting pad with the mount on an inflatable cylinder with the help of two part polyurethane adhesive or to weld it on by using HFC welding. The enlarged glue on surface allows the pad to withstand considerable loads.
!!! Attention: To avoid overturning of the boat, it is recommended to install the ladder in the stern or bow. When positioning the engine and ladder aft, make sure there is sufficient counterweight in the bow. The adapter has an o-ring and must be lubricated with silicone grease. Silicone grease is designed to lubricate the moving parts of the lock and adapter with an O-ring, the grease prevents the formation of a water film and prevents it from freezing, which ensures reliable operation in low temperatures.