Inflatable boat Navigator LP 270BK
$ 1 240 $ 1 065 + HST/GST
Following LP 270BK Navigator Models with a book-type floor and a keel are available: LP 240BK, LP 270BK, LP 290BK, LP 320BK.
The boats are heat-welded using high-quality German PVC Valmex or Plastel produced by Mehler Texnologies with a density of 750 – 1000 g / m2. This increases their lifecycle and minimizes air leakage from the seams.
2021 colors: blue 573, sea blue 574, storm gray 783, light gray 729, orange 205, blood orange 350, white 907, Kamo 729 (Yukon, green, khaki).
Pre-orders for custom color combinations available!
Inflatable boat Navigator LP 270BK is a product of European quality.
Inflatable boat Navigator LP 270BK has been popular with fans of fishing and water recreation for more than 15 years for its high quality and reliability.
The boat has a U-shaped cylinder with a reinforced transom made of waterproof plywood. The Cylinders are divided into 4 pressurized compartments (nose, left, right, and an inflatable keel). The patented boat shape, thanks to the full cut of the fabric, has 4 circular and 2 longitudinal seams, which ensures high tightness of the cylinders and minimizes seam leakage.
The Navigator Advantage – Navigator Inflatable boat offers:
- The newest joining technology – thermal welding method.
- The original design of the cylinders – shape narrows down to the nose, thus boosts marine performance.
- The minimum number of joining seams.
- Increased tightness and reliability of the cylinders.
- The Longitudinal and circumferential seams are heat-welded.
- The V-shaped keel bottom improves performance and reduces shock loads during wave passage.
- Improved ride quality thanks to hydrodynamic contours.
- The course stabilizers (keel) installed in the stern provide better directional stability.
- Switching to gliding mode starting with 2.5 hp motors (depends on the model).
- High-quality hull material – Boats are made of high-quality boat German PVC Valmex or Plastel produced by Mehler Texnologies with a density of 750 – 1000 g / m2, which ensures their long-term operation without additional processing of seams.
- The movable seat support system is used to comfortably accommodate passengers in the boat.
- The use of a book-type floor greatly speeds up the process of assembling and disassembling the boat.
- Team of professionals. 100% quality control at every technological stage.
- 5 year warranty Follow our news on instagram and facebook!
Specifications
Brand, model: Navigator LP 270BK
Boat type: Roll-up Boat with an inflatable keel and a book-type floor
Body material: Valmex or Plastel PVC, Mehler Texnologies
Length overall, (ft): 8,86
Length inside, (ft): 6,56
Width overall, (ft): 4,53
Width inside, (ft): 2,03
Outer length, cm: 270
Outer width, cm: 138
Number of chambers: 3
Diameter of cylinders, mm: 380, (1,25ft)
The density of the boat cylinder material, g / m2: 750
The density of the boat bottom material, g / m2: 750
Floor-type: Book-Type Floor
Bottom type: Inflatable Keel
Transom Type: Reinforced Transom
Transom height, mm: 381, (ft) / S,L · 1,35/S (15″)
Transom thickness, mm: 18
Passenger capacity, people: 2
Loading capacity, kg: 300 (560 lbs)
Recommended motor power, HP: 2.5
Maximum engine power, HP: 5
Standard set includes: Anchor roller (roller)
Handles for transportation, pcs: 2 on the ends of the cylinders
Paddle length, cm: 140
Oarlocks type: rotary, pin type
Overall weight, kg: 32, (57lb)
Boat bag size, cm: 115 * 40 * 40
Deck bag size, cm: 100 * 60 * 10
Warranty for welded seams, months: 60
Warranty for PVC material, months: 60
Features
- The welded frame of the cylinders is divided into 3 independent pressurized compartments.
- A 9 cm wide rubber protector (teardrop rubbing strake) is glued around the tube.
- A lifeline 8-10 mm thick is mounted around the outer perimeter of the boat.
- Floor-type – book type floor (4-section) 9 mm thick, wooden boards are connected to each other with PVC strips, 1 piece which folds as a flyer/book.
- Reinforced stationary transom made of marine grade water-resistant plywood 18 mm thick is installed under a certain angle to the cylinders to boost performance. The upper part of the transom is equipped with a protective strip, the sides have special motor-mount planks.
- To transport the boat, 2 handles on the ends of the cylinders may be used.
- The universal towing handle in the bow, made of durable plastic, is used for towing and anchoring the boat.
- A towing ring and anchor roller is used to attach the anchor cable to the bow.
- The boat is equipped with a pressure-control safety valve.
Included in Box
Standard complete package of an inflatable boat (LP-series):
- Two movable seats that are easily adjusted along the entire length of the rails.
- Two detachable aluminum oars – 1.4 meters long.
- Inflatable boat foot pump – 6 liters.
- Small repair kit (PVC patch, glue, valve instrument).
- Operation manual.
- Transporting bag for the boat – 1 pc. (fits in a car trunk)
- Transporting bag for book type floor – 1 pc. (fits in a car trunk)
Recommendations
Additional recommended offers available for the boat:
- outboard motors
- installation of transom wheels,
- installation of storage/transporting covers,
- installation of a bimini cockpit tent canopy,
- installation of an anchor lock, PVC rod holders, a table for a fishfinder, etc.,
- installation of a protective bar 12 cm on the keel and cylinders,
- Anti-slip rug for a boat
- PVC bow bag,
- Safety vests (one or two-sided).
- If you have other specific needs, let us know and we’d try to accommodate.
Related products
Book-Type Floor with Keel (LP-BK series)
Book-Type Floor with Keel (LP-BK series)
Book-Type Floor with Keel (LP-BK series)
Book-Type Floor with Keel (LP-BK series)