Rigid Inflatable Boat (RIB) Navigator F-380 Red/Grey
$ 5 960 + HST/GST
The “RIB” series of keel boats with a book floor type are represented by the F-380 model with a 5-person capacity and the F-420, which can accommodate up to 6 persons.
The design of the Rigid Inflatable Boat (RIB) Navigator F-380 Red/Grey has a reinforced fiberglass “Deep V” shaped bottom with longitudinal steps. The main effect of the redans is to cut off the water flows from the bottom, spreading from the keel to the sides, which together increases the hydrodynamic quality of the hull.
Navigator F-380
The design of this 5-person Rigid Inflatable Boat (RIB) Navigator F-380 Red/Grey has reinforced fibreglass “Deep V” shaped bottom with longitudinal steps.
The main effect of the redans is to cut off the water flows from the bottom, spreading from the keel to the sides, which together increases the hydrodynamic quality of the hull.
Advantage of the Rigid Inflatable Boat (RIB) Navigator F-380 Red/Grey:
– “Deep V” -shaped bottom, it is possible to obtain a higher speed than on hulls with a low deadrise,
– Achieved increased seaworthiness by increasing the cylinders of the boat up to 46 cm and a large deadrise angle,
– More resistant to high waves and passes them much more comfortable and safer,
– Has a higher carrying capacity, which expands the ability to transport people.
The Navigator Advantage – Navigator Inflatable boat offers:
- The newest joining technology – thermal welding method.
- The original design of the cylinder – shape narrows down to the nose, thus boosts marine performance.
- The minimum number of joining seams.
- Increased tightness and reliability of the cylinders.
- The Longitudinal and circumferential seams are heat-welded.
- Improved ride quality thanks to hydrodynamic contours.
- The course stabilizers (keel) installed in the stern provide better directional stability.
- Switching to gliding mode starting with 2.5 hp motors (depends on the model).
- High-quality hull material – Boats are made of high-quality boat German PVC Valmex or Plastel produced by Mehler Texnologies with a density of 750 – 1000 g / m2, ensuring their long-term operation without additional processing of seams.
- The movable seat support system can accommodate passengers in the boat comfortably.
- The use of a slated-type floor dramatically speeds up the process of assembling and disassembling the boat.
- Team of professionals. 100% quality control at every technological stage.
- 5-year warranty
Specifications
| · Brand, model | · Navigator F380 |
| · Boat type | · RIB |
| · Body material | · Fiberglass |
| · Material manufacturer | · Valmex |
| · Length overall (m) | · 3,80 (12.5′) |
| · Length inside (m) | · 2,78 (9.2′) |
| · Width overall (m) | · 1,90 (6.2′) |
| · Width inside (m) | · 0,95 (3.1′) |
| · Tube diameter (m) | · 0,46 |
| · Transom type | . Stationary |
| · Transom height (mm) / S,L | · S/L |
| · Overall weight (kg), netto | · 110 |
| · Floor type | . PVC |
| · Chamber diameter (m) | · 0,46 |
| · No. of chambers | · 3 |
| · Max. persons | · 5 |
| · Max. engine (kw/hp) | · 26 / 35 |
Features
– “Deep V” -shaped bottom, it is possible to obtain a higher speed than on hulls with a low deadrise,
– Achieved increased seaworthiness, by increasing the cylinders of the boat up to 46 cm and a large deadrise angle,
– More resistant to high waves and passes them much more comfortable and safer,
– Has a higher carrying capacity, which expands the ability to transport people.
Standart Equipment
– inflatable boat with a reinforced plastic bottom,
– nose locker made of fiberglass,
– reinforced transom with internal and external engine lining,
– inflatable welded balloon with three independent pressurized compartments,
– overpressure (relief) valve,
– V-shaped bottom made of fiberglass,
– deck with anti-slip coating,
– fender with a water chipper,
– transport handles in a quantity of 4 pcs.,
– bow towing ring,
– drain valve,
– movable seats – 2 pieces,
– aluminum oars – 2 pcs,
– foot pump – 1 piece,
– repair kit – 1 pc.
