Rod holder for inflatable board (NT213+NLP225) in Canada or the United States. Navigator Inflatable Boats offers a great variety of accessories for Inflatable boats in North America, including Rod holder (spinning rod) for inflatable board, pumps, bags, wheels, equipment, fittings and other attachments for a boat.
The Rod holder for inflatable board (NT213+NLP225) set includes products made of polyamide, this is a spinning rod holder housing on which an annular reel and rod forend is installed with the possibility of rotation on the body in order to fix the rod reel during transportation, and a back stop, which has two positions. In a position parallel to the body, the back stop serves as a rod limiter and lock. An adapter is screwed to the body of the spinning rod holder using a stainless steel bolt and a nut handle, between which there are adjusting washers with an angle of 7.5 degrees. The spring is made of stainless steel and is located between the body and the adapter. The adapter has an O-ring to prevent water or dirt from entering. The O-ring must be periodically lubricated with the silicone grease that comes with the kit. On the body of the holder there is a hole for fixing the rod with a safety leash. Place the rod holder in the lock and adjust the required position, then it can be used.
The kit includes: a mounting platform measuring 140 x 140 mm with a lock, a spinning rod holder and spare parts for self-installation of the holder on an inflatable balloon of a floating craft. Color: gray, black.